How often should I get my windows cleaned?

Most homeowners in Fargo get their windows cleaned twice a year — spring and fall. But if you have a business, a lake cabin, or windows that face a busy street or a sprinkler system, more frequent cleaning makes sense. We'll give you an honest recommendation based on what we see.

Can you remove hard water stains from my windows?

Yes, in most cases. Hard water stains from sprinklers or well water can be very stubborn, but we have specialized treatments for mineral deposit removal. Very old or severely etched glass sometimes has permanent damage — we'll let you know honestly what's possible when we take a look.

Do I need to be home when you clean my windows?

For exterior-only cleaning, no — you don't need to be there. For interior window cleaning, someone does need to let us in. We'll schedule a time that works for you.

What's the difference between pressure washing and soft washing?

Pressure washing uses high-pressure water to blast away dirt — good for concrete, brick, and tough surfaces. Soft washing uses lower pressure plus cleaning solutions, and it's better for siding, painted surfaces, and anything that could be damaged by high pressure. We use the right method for each surface.

Do you clean windows on tall buildings or second-story homes?

Yes. We have the equipment and experience to safely clean windows at height — both on residential homes and commercial buildings. Safety is something we take seriously on every job.

Absolutely. We're fully insured and licensed. You should always ask any window cleaning company this before you hire them. It protects you if anything ever goes wrong.

Post Construction Window Cleaning in Fargo, ND

Construction leaves paint, caulk, concrete, and adhesive on every pane. We remove it all without scratching the glass — so the project hands off clean.

Every construction and renovation project in Fargo ends the same way — the work is done but the windows are a mess. Paint overspray, concrete splatter, silicone caulk, sticker adhesive, drywall dust, and construction film coat the glass on every new build and major renovation. You can’t open to occupants or hand off to a client with windows in that condition. Home Revival USA handles post-construction window cleaning for general contractors, builders, and commercial project managers across Fargo-Moorhead. We remove every contaminant without scratching the glass, so the job finishes clean. Call (701) 360-1191 to get on the schedule.

Construction Debris Gets Harder to Remove the Longer It Sits
Paint, caulk, and concrete all cure and bond more firmly to glass over time. A post-construction clean done within days of project completion takes less time and reduces the risk of needing abrasive removal methods that can scratch the glass. Don’t wait until move-in day — book it as part of the final punch list.

What We Remove

Construction Contaminants We Clean From Glass

Post-construction glass has a different set of problems than routine window grime. Each type of contamination requires a specific approach — the wrong technique scratches the glass, the right one removes it cleanly.

🎨

Paint Overspray

Fine paint mist from sprayers settles across every surface. We remove it with blade tools and solvents matched to the paint type.

🧱

Concrete & Mortar

Splatter from masonry work bonds hard to glass. Treated with appropriate acid-safe solutions before scraping.

🔧

Caulk & Silicone

Excess caulk around frames is removed carefully without damaging the new seal or scratching surrounding glass.

🏷️

Sticker & Tape Adhesive

Label residue and protective film adhesive left on new windows is dissolved and removed cleanly.

💨

Drywall Dust & Film

The fine grey film that coats every surface during drywall work is removed from glass, frames, and sills.

🪟

Protective Film Residue

Plastic protective film left on windows during construction often leaves adhesive residue that needs specific removal.

Who We Work With

Post-Construction Cleaning for Every Project Type

We work directly with the project team — GCs, builders, and project managers — not as an afterthought but as a planned final step before handoff or occupancy.

🏗️ New Construction

New residential builds ready for owner walkthrough
Commercial buildings before tenant move-in
Multi-unit residential before leasing begins
Spec homes being listed or staged for sale

🔨 Renovation Projects

Kitchen or bathroom remodel with overspray on nearby windows
Office build-outs ready for occupancy
Retail renovation before reopening to customers
Historic building restorations with new or original glass

Project is done and windows need cleaning before owner walkthrough or punch list close
Tenants or owners are moving in and glass is covered in construction debris
GC needs a documented final clean as part of project closeout
Paint or caulk was applied near windows and got on the glass
Protective film has been on the windows through the build and needs proper removal

How We Work

Our Post-Construction Cleaning Process

Post-construction cleaning requires different tools and more careful technique than routine window washing. We assess what’s on the glass before we start and match the removal method to the contaminant — no one-size approach that risks scratching new glass.

STEP 1

Contaminant Assessment

We walk every window on the site and identify what’s on the glass — paint type, caulk condition, adhesive residue — before choosing tools and solutions.

STEP 2

Dry Debris Removal

Loose dust, drywall debris, and loose film are cleared first — adding moisture before dry removal turns debris into abrasive mud that scratches glass.

STEP 3

Chemical Soak Where Needed

Bonded paint, adhesive, and concrete get the right solvent or remover applied and given time to dwell before any scraping begins.

STEP 4

Blade & Scraper Work

Where chemical alone won’t remove debris, we use professional-grade razor scrapers at the correct angle on wet glass — never dry scraping, which causes scratches.

STEP 5

Final Streak-Free Clean

After all contamination is removed, every pane gets a full squeegee clean so the glass finishes spotless — ready for occupancy or owner inspection photos.

STEP 6

Frame, Sill & Track Detail

Construction dust and debris in tracks and on sills gets cleaned too — a post-construction window clean that stops at the glass doesn’t finish the job.

Post-Construction Window Cleaning Cost in Fargo

Free On-Site Quote

What Affects the Price

Post-construction cleaning takes significantly more time than routine window maintenance. Pricing depends on the number of windows, the severity and type of contamination, whether blade work is required, and site access conditions.

We always quote post-construction jobs on-site — the scope varies too much between projects to give accurate pricing over the phone. Call us and we’ll schedule a site walk within 24–48 hours.

(701) 360-1191 — Call to schedule a free on-site assessment for your project.

Why Home Revival Window Cleaning

Why Choose Us for Post-Construction Cleaning

Post-construction window cleaning done wrong scratches new glass and creates warranty issues. We use the right tools, the right solvents, and the right technique for each type of contamination — and we back the work with a satisfaction guarantee. We’ve cleaned windows on new builds and renovations across Fargo-Moorhead and we know how to get a project closed out clean.

Licensed & Insured

In ND and MN. Full commercial and construction site coverage.

5-Star Rated

Trusted by GCs and project managers across Fargo-Moorhead.

Satisfaction Guarantee

Job not right? We come back before your handoff date.

Fast Turnaround

We understand construction timelines. We work fast without cutting corners.

Get the Job Closed Out Clean

Call us to schedule an on-site assessment for your Fargo project — new build, renovation, or commercial fit-out.

(701) 360-1191

Call Now — Free Site Assessment

Part of our Commercial Window Cleaning services in Fargo, ND.